Tap & Toilet Repairs in Bronte

In most cases, yes. Original brass and chrome tapware in Bronte's Federation and interwar homes can often be re-seated, re-washered, and brought back to full function. The bodies on quality period taps are solid brass and will outlast modern equivalents. Where cartridges or spindles have worn out and the exact replacement is no longer made, specialist suppliers can sometimes source compatible parts. We'll assess honestly whether repair is viable or whether the tap is beyond saving. If replacement is needed, we can advise on period-appropriate options that suit the home's character.

Low pressure in Bronte cottages is often caused by corroded galvanised pipework internally, not the taps themselves. Original galvanised water mains in homes over 60 years old corrode from the inside, gradually narrowing the bore and restricting flow. We check pressure at the meter first to confirm the supply is adequate, then test at individual taps to find where the restriction is. If it's the internal pipework, partial or full re-piping is the long-term fix. If it's the taps themselves (blocked aerators or seized cartridges), that's a quick repair.

Usually not. A running toilet is typically a worn inlet valve or flush seal - we'll quote upfront before starting. Worth fixing quickly though - a running toilet can waste 25,000+ litres per quarter, which adds up on your water bill.

Most mixer taps can be repaired by replacing the ceramic cartridge - much cheaper than a new tap. If the tap body itself is corroded or the cartridge is obsolete, replacement is the way to go. We'll advise honestly.

If your taps are 15+ years old, yes. Modern WELS-rated fixtures use significantly less water without sacrificing pressure. The water savings often pay for the upgrade within a couple of years.

That's water hammer - caused by high water pressure or unsecured pipes. We can install a water hammer arrestor or pressure limiting valve to fix it. Left untreated, it can damage pipe joints over time.